Pipe & Cable Location

Easyloc Cable Locator System
ViVax vLoc Location System
i5000 Location System
FM810Dx Location System
FM 9800XT Line Locators
FLE 10 Receiver
FLG 10 - Signal Generator
FLG 50 - Signal Generator
FLG 50/200 - Signal Generator
Accessories
Reconditioned Equipment
vLoc - Multi-frequency line Accessories

 The range of accessories available to further extend the capability of the vLoc Pro system include:

 

vLocDM-g2.png
A-frame
The A-frame accessory is used to detect ground faults on pipes and cables. In the case of pipes, the faults consist of coating defects. In the case of cables, faults are usually caused by insulation damage allowing the metallic sheath (or internal conductor) to become in contact with the ground.
VX5-125-gallery.png
VX5/125 Clamp
  • To apply the transmitter signal to a target cable when no access to the conductor is possible
  • 5in (125mm) diameter
VX4-100-gallery.png

VX4/100 Clamp

  • To apply the transmitter signal to a target cable when no access to the conductor is possible
  • 4" (100mm) diameter cable
remote-antenna-usb-gallery.png
Remote Antenna
The Remote Antenna can be used to help to identify a particular cable on a cable tray or where cables are bunched together.
LPC.png
LPC Separation Filter
The LPC Separation Filter (LPC) is used to safely inject trace tone to a live cable via a domestic mains socket, so that the cable can be traced from the premises to the connection in the street. It is suitable for connecting to voltages between 100V AC and 250V AC.
Aux-batt-gallery.png
Auxiliary Rechargeable Battery
The Aux Battery 12V DC is a useful addition to the receiver battery packs. To use the Aux Battery, replace the alkaline pack with the Aux Battery pack.

If the receiver has two battery indicators the long horizontal battery icon refers to the charge condition of the Aux Battery. to charge the Aux Battery, remove the pack from the receiver, connect to the receiver battery charger and charge as indicated in the usual way.

Sondes_1.png
Sondes
A small transmitting coil which may be built into a product such as a sewer camera or packaged as a small self contained battery powered transmitter. A receiver tuned to the same frequency can locate the position and depth of the Sonde and hence whatever it is attached to or in. Frequently used for locating sewer cameras, and the non metallic pipes.
charging-lead-gallery.png
Receiver Vehicle Charging Lead
The Receiver Vehicle Charging Lead, 12ft (4m) long lead to charge the receiver's battery (or Aux Battery pack) while on the move.
Loc10Tx-batt-trat-gallery.png

Loc-10Tx Battery Tray

Loc10Tx-power-lead-gallery.png
Loc-10Tx Power Lead
  • to power (NOT charge) the transmitter from a vehicle
  • 30ft (10m) long cable

 

 

SebaKMT UK Limited, Unit C, Beversbrook Centre, Redman Road, Calne, Wiltshire, SN11 9PR, United Kingdom - Registered in England: 04593899

Copyright © 2012 SebaKMTUK. All Rights Reserved.

Website designed & maintained by Insight Global Limited

JoomlaWatch 1.2.12 - Joomla Monitor and Live Stats by Matej Koval